...................................................
 


Map and Contact info
News and Technology
Accel Import Auto Repair
Links - Sand Related
Hot Tips for building cars

Motor Matrix
 

Turbo Systems
Fuel related parts
Engine Management Computers
Blocks, Pistons, Rods
Intercoolers and Scoops
Exhaust Systems
Oil Pans and fillers
Intake and Water Manifolds
Clutch and Flywheel

Gaskets, belts, bearings, and bolts


JDM Motor cores
2.0L JDM Motors
250 to 300HP Turnkey Motors
400 to 500HP Turnkey Motors
 600HP Turnkey Motors
 

Dyno Tuning
Wiring Harness Fabrication
Debugging Problems
 


 

 

 

 

 

 

Both of the fuel pumps works good in a sandrail application.  The Outfront style is a little skinnier but longer.  The best feature on the Outfront unit is how quiet it is.

Both units have 1/2" inlet nipples for clamp on hoses.  Both units have AN fitting on the outlet side to handle the high fuel pressures.

Primary Filter, 1/2" inlet and outlet. This is installed before the fuel pump where the fuel is not pressurized.
Secondary fuel filter.  Threaded on both ends for AN braided high pressure hoses.  Installs between the fuel pump and the motor fuel rails.
Here's a simple diagram of how we recommend connecting your fuel delivery system to the motor.

Outfront Motorsports, Inc. -  8071 Commonwealth Ave    -   Buena Park, CA 90621  Ph (714) 994-5222    Fax (714) 994-5633 
Copyright © 2004-2009    -    Last modified: 09/09/09