|
...................................................
Map and Contact info
News and Technology
Accel Import
Auto Repair
Links - Sand
Related
Hot Tips for building
cars
Motor Matrix
Turbo Systems
Fuel
related parts
Engine
Management Computers
Blocks,
Pistons, Rods
Intercoolers and
Scoops
Exhaust Systems
Oil Pans
and fillers
Intake
and Water Manifolds
Clutch and
Flywheel
Gaskets, belts, bearings, and bolts
JDM Motor
cores
2.0L JDM Motors
250 to 300HP Turnkey
Motors
400 to 500HP
Turnkey Motors
600HP Turnkey
Motors
Dyno Tuning
Wiring Harness
Fabrication
Debugging Problems
| |
| Getting air in the fuel line of a fuel
injection system is a no no. With all the ups and downs of the dunes
extra measures need to be taken to minimize the risk of sucking air when
your gas level gets low. The most reliable way to do this is by
installing a gas well onto the bottom of your gas tank. If you use a
standard 8" or 10" aluminum cylindrical tank this unit is an easy way to make
your gas tank work flawless, minimizing the risk of sucking air. First you choose the location you would like to position
the fuel
feed and return flanges on the well, drill the holes and weld those on. Then drill some holes in
the bottom of your tank, or remove the existing fuel valve and weld this
unit over the hole(s).
Outfront can do the welding if you need someone to do this
work. |
 |
| Here's what the well looks like after it's
welded onto your gas tank. |
 |
|
