If you like the value of the Atom, but are looking for a couple of extra features, then the Monsoon is the ECU for you.

With the Monsoon you have all the tuning capabilities of the Atom, but you can also choose to run some of the following features: Gearshift Control, Launch Control, Anti-lag, VVT Control and Closed Loop Boost Control. It also comes with a built in 4Bar MAP sensor further reducing installation cost.

Note: The Monsoon will run any of the above features, but it cannot run them all at once. The amount of features you can run is dependent on how many of the limited Inputs and Outputs each feature needs.

The Monsoon can control up to 2 rotors or 4 cylinders with sequential injection and direct spark. This makes it ideal for naturally aspirated or turbocharged engines that just need a retune and one or two extra features, so you don't need to jump up to one of our higher level ECUs.

Requires “A” loom

Inputs

• 4 x Digital inputs
• 2 x Temperature inputs
• 4 x Analog inputs
• 2 x Trigger inputs
• 1 x Onboard 4 Bar MAP sensor

Outputs

• 4 x Injector drives
• 4 x Ignition drivers
• 6 x Auxiliary outputs^
• +5V Sensor power supply
• ^unused ignition drives can be used as additional Aux outputs 

Communications

• 1x CAN bus
• 1x USB tuning connection 

Physical:

• Dimensions: 95mm(L) x 130mm(W) x 45mm(H) (without loom)\
• Weight: 220 grams

Advanced features not found on the Atom:

• Full gear shift control, antilag, rolling antilag and launch control.
• Up to 2 fully variable closed loop VVT cams.

Onboard 4 Bar MAP sensor
32Mb of logging memory
20 general-purpose tables
Runs on PC Link software