Outfront Motorsports Subaru Performance On-Road and Off-Road Parts Store

Applications: Subaru WRX 2002-2017 / STI 2004-2017All Torque Solution mounts are made of high grade billet aluminum material, urethane bushings, and stainless steel pins. This is a direct replacement of the OEM transmission mount. You can rest assured that with our superior material and design you will get optimal performance for years and decades to come. The mount features 75 durometer bushings which keep vibrations down to a minimum while keeping your trans in place under hard acceleration, cornering, and braking. Whether you have a street, strip or auto x/road race built car, Torque Solution mounts will deliver the performance you need under all conditions.New lightweight full billet design!!

This pitch stop is completely solid with no bushings! 
The OEM pitch stop is a poor excuse for a performance part, it can easily move and shift around from the soft bushings and can wear out overtime. The Aluminati pitch stop prevents the transmission from pitching back and fourth during hard acceleration, deceleration or cornering. Increased NVH will be present. Not recommended for rally racing.  

These motor mounts are completely solid!  
The stock motor mounts are very soft and can fail at higher than stock power levels. Aluminati motor mounts are completely solid and prevent any engine movement to insure instant power transfer, prevent power loss and provide better throttle response. Increased NVH will be present. Not recommended for rally racing. 

This trans mount is completely solid! 
The Aluminati trans mount greatly reduces transmission movement when accelerating, decelerating and cornering. You will feel more connected to your vehicle immediately after installation. Ever upshift and downshift will feel crisp and accurate. Increased NVH will be present. Not recommended for rally racing. 

The Subaru Pitch Control Mount is found under the factory top-mount intercooler (installation is simple) between the fire wall and the front end of the transmission. The pitch mount is designed to produce crisper gear shifts by preventing the front end of the transmission from pitching up or down, forward and back.

Torque Solution Transmission Mount fits all 5 speed and 6 speed WRX and STI cars from 2002-2014 and many more. This mount eliminates wheel hop/traction loss and improves 60 fts. It is made out of lightweight 6061-T6 aluminum and steel. The black anodized housing with 75 A durometer bushings have been street and track torture tested and carry a life time warranty. Made in the USA

Torque Solution engine mounts you will see and feel a difference in your WRX or STi. These mounts are made out of high grade billet aluminum material and steel. You can rest assure that with our superior material and design you will get optimal performance for years and decades to come. The mounts feature 75 durometer bushings which keep vibrations down to a minimum while keep your engine in place under hard acceleration, cornering, and braking. Weather you have a street, strip or autox/road race built car, Torque Solution mounts will deliver the performance you need under all conditions.

Torque Solution Engine and Transmission Mounts fit all 5 speed and 6 speed WRX and STI cars from 2002-2014 and many more. These mounts eliminates wheel hop/traction loss and improves 60 fts. They are made out of lightweight 6061-T6 aluminum and steel. The black anodized housings with 75 A durometer bushings have been street and track torture tested and carry a life time warranty. Made in the USA

Torque Solution Pitch Stop, Engine and Transmission Mounts fit all 5 speed and 6 speed WRX and STI cars from 2002-2014 and many more. These mounts eliminates wheel hop/traction loss and improves 60 fts. They are made out of lightweight 6061-T6 aluminum and steel. The black anodized housings with 75 A durometer bushings have been street and track torture tested and carry a life time warranty. Made in the USA

Applications: Subaru BRZ & Scion FR-S 2013+

Torque Solution Polyurethane Transmission Inserts are designed to limit the amount of transmission movement under on off throttle and braking conditions. The factory mount allows the transmission to move which gives the feeling of a sloppy drivetrain. The mounts will give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the transmission movement without the issue of Solid Mount Vibration. Why replace your broken mount with the same rubber mount that will break again due to deteriorating rubber. Replace it 1x with a polyurethane inserted mount and do it right.

Applications: Subaru BRZ & Scion FR-S 2013+

Torque Solution Polyurethane Transmission Inserts are designed to limit the amount of transmission movement under on-off throttle and braking conditions. The factory mount allows the transmission to move which gives the feeling of a sloppy drivetrain. The mounts will give the car a more direct feel and more precise driver input to the vehicle. You can expect a much better feel under Braking, Acceleration, & lateral G's. While typically most " Race Cars " use a SOLID MOUNT, this solution is less harsh and still maintains better control of the transmission movement without the issue of Solid Mount Vibration. Why replace your broken mount with the same rubber mount that will break again due to deteriorating rubber. Replace it 1x with a polyurethane inserted mount and do it right.