GSC Stage 1 Cams for Low Mount Turbo Platforms 2010-2012

GSC Stage 1 Cams for Low Mount Turbo Platforms  2010-2012
  • GSC Stage 1 Cams for Low Mount Turbo Platforms  2010-2012
  • GSC Stage 1 Cams for Low Mount Turbo Platforms  2010-2012
  • GSC Stage 1 Cams for Low Mount Turbo Platforms  2010-2012
  • GSC Stage 1 Cams for Low Mount Turbo Platforms  2010-2012
  • GSC Stage 1 Cams for Low Mount Turbo Platforms  2010-2012
SKU GSC-7024S1
$0.00
Out of stock

GSC Power-Division billet S1 camshafts for the USDM 2010-2012 LGT with Low mount turbo W/ oil scavenge pump on the back of the head. These will not drop any low end power, and will create more power and torque across the entire RPM range. Good for stock frame upgraded turbos or up to 500 WHP upgrades. Upgraded valve springs are required; Beehive valve springs are recommended, but not required.

*Check Pictures for cam placement. Long nose= Left Side, short nose - Right Side

Due to the lobe size, head castings may need to be filed down slightly for clearance - Please check during install

Proper break-in and running high zinc oil is a must on flat tappet engines

Must be installed by an experienced technician.

7025S1  ADV Duration  Duration @ 0.040"  Peak Lift  Center Line
Intake 264°  226°  10.80mm 125°
Exhaust 264°  222°  10.50mm 115°

 

Fits
  • Subaru Legacy 2.5L TURBO 6MT 4WD GT Limited Sedan 2010, 2011, 2012
  • Subaru Legacy 2.5L TURBO 6MT 4WD GT Premium Sedan 2010, 2011